彩绘膜系列
LED彩光系列
透光膜系列
3D造型系列服务导航
Product categories
您当前位置：首页>工程动态工程动态
软膜膜构造的支承构造和各项联接构造应契合以下规范：
发表时间：2016-11-25 09:28:12 发表作者：phpcms 浏览次数：
提升档次和品位,软膜天花助你一臂之力 膜构造的支承构造和各项联接构造应契合以下规范：
To enhance the quality and grade of soft film smallpox help you a helping hand film structure, support structure and the connecting structure should conform to the following specifications:
1、确保联接的安全、合理、美丽。
1, to ensure that the connection is safe, reasonable and beautiful.
2、联接件应具有足够的强度、刚度和耐久性，应不先于所联接的膜材、拉索或钢构件损坏，并不发作影响构造受力功用的变形。联接处的膜材应不先于其它部位的膜材损坏。
The 2 connecting parts should have sufficient strength, stiffness and durability, should not precede the membrane material and the connecting cable or steel parts damaged, does not attack force function of the influence of tectonic deformation. The membrane material of the joint should not be damaged before the other parts of the membrane.
3、联接件应传力牢靠，并削减联接处应力会集。
3, joint force should be firm, and cut joint stress convergence.
4、节点构造应契合计算假定。应思考节点构造偏心对拉索、膜材发作的影响，施加预张力的办法、构造装置答应误差，以及进行二次张拉的也许性。
4, node structure should be fit to calculate the assumption. The influence of the structure of the joints on the attack of the cable and the membrane material, the method of pre tension, the error of the construction device, and the possibility of the two tensile stress should be considered.
5、在膜材联接处应坚持高度水密性，应采取必定的构造办法防止膜材磨损和撕裂。
5, at the junction of the membrane material should adhere to a high degree of water tightness, should take a certain structural measures to prevent the wear and tear of the film.
6、对金属联接件应选用牢靠的防腐蚀办法。 7、在支承构件与膜材的联接处不得有毛刺、尖角、尖点。
6, the metal connection pieces should choose a reliable anti-corrosion measures. 7, the connection point of the support member and the membrane material remove burrs and sharp edges, sharp point.
膜构造的支承构造和各项联接构造应契合以下规范：
The supporting structure of the membrane structure and the connection structure should meet the following specifications:
1、确保联接的安全、合理、美丽。
1, to ensure that the connection is safe, reasonable and beautiful.
2、联接件应具有足够的强度、刚度和耐久性，应不先于所联接的膜材、拉索或钢构件损坏，并不发作影响构造受力功用的变形。联接处的膜材应不先于其它部位的膜材损坏。
The 2 connecting parts should have sufficient strength, stiffness and durability, should not precede the membrane material and the connecting cable or steel parts damaged, does not attack force function of the influence of tectonic deformation. The membrane material of the joint should not be damaged before the other parts of the membrane.
3、联接件应传力牢靠，并削减联接处应力会集。
3, joint force should be firm, and cut joint stress convergence.
4、节点构造应契合计算假定。应思考节点构造偏心对拉索、膜材发作的影响，施加预张力的办法、构造装置答应误差，以及进行二次张拉的也许性。
4, node structure should be fit to calculate the assumption. The influence of the structure of the joints on the attack of the cable and the membrane material, the method of pre tension, the error of the construction device, and the possibility of the two tensile stress should be considered.
5、在膜材联接处应坚持高度水密性，应采取必定的构造办法防止膜材磨损和撕裂。
5, at the junction of the membrane material should adhere to a high degree of water tightness, should take a certain structural measures to prevent the wear and tear of the film.
6、对金属联接件应选用牢靠的防腐蚀办法。
6, the metal connection pieces should choose a reliable anti-corrosion measures.
7、在支承构件与膜材的联接处不得有毛刺、尖角、尖点。
7, the connection point of the support member and the membrane material remove burrs and sharp edges, sharp point.
软膜天花防火等级是多少？软膜天花是由三个有些所构成的软膜，扣边条，龙骨。其间软膜天花选用格外的资料制成，确保不含污染环境元素(镉)，其防火等级为B1（我国），经过一次或屡次切开成形，并用高频焊接完结，软膜天花是要依照在实地丈量出的天花形状及尺度在工厂里出产制造而成。软膜天花扣边条：是半硬质，揉捏成形的，选用资料，其防火等级为B1（我国），A级防火膜天花被焊接在天花软膜的附近边际，以张紧软膜扣在墙码条上,能够到达完美缝合的作用。
How much is the piamater ceiling fire rating? Soft film smallpox is composed of three strips of some soft, buckle, keel. During the selection of extra soft film ceiling materials, to ensure that does not contain elements of environmental pollution (CD), the fire rating of B1 (China), after one or more open forming, and by high frequency welding end, soft film smallpox is to make production in the factory in accordance with the shape and scale of smallpox in the field of measurement and. Soft film smallpox buckle edge: is semi hard, kneading, forming material selection, the fire rating of B1 (China), a fireproof film is welded to the smallpox smallpox soft film near the margin, with tensioning buckle in soft wall bar code, can reach the perfect stitching effect.
配件：选用铝合金制成，其防火等级为A1（我国）。拉膜天花有各式各样适宜的不相同形状，直的、弯的，有的是可被切开成适宜的视点后再装置在一同，并被固定在室内天花的附近上，以用来扣住天花软膜。
Accessories: the use of aluminum alloy, the fire rating of A1 (China). Film pulling with smallpox for every kind of different shapes, straight, curved, some can be cut into the appropriate view after the device together, and are fixed in the vicinity of the indoor ceiling, to fasten the smallpox soft film.
To enhance the quality and grade of soft film smallpox help you a helping hand film structure, support structure and the connecting structure should conform to the following specifications:
1、确保联接的安全、合理、美丽。
1, to ensure that the connection is safe, reasonable and beautiful.
2、联接件应具有足够的强度、刚度和耐久性，应不先于所联接的膜材、拉索或钢构件损坏，并不发作影响构造受力功用的变形。联接处的膜材应不先于其它部位的膜材损坏。
The 2 connecting parts should have sufficient strength, stiffness and durability, should not precede the membrane material and the connecting cable or steel parts damaged, does not attack force function of the influence of tectonic deformation. The membrane material of the joint should not be damaged before the other parts of the membrane.
3、联接件应传力牢靠，并削减联接处应力会集。
3, joint force should be firm, and cut joint stress convergence.
4、节点构造应契合计算假定。应思考节点构造偏心对拉索、膜材发作的影响，施加预张力的办法、构造装置答应误差，以及进行二次张拉的也许性。
4, node structure should be fit to calculate the assumption. The influence of the structure of the joints on the attack of the cable and the membrane material, the method of pre tension, the error of the construction device, and the possibility of the two tensile stress should be considered.
5、在膜材联接处应坚持高度水密性，应采取必定的构造办法防止膜材磨损和撕裂。
5, at the junction of the membrane material should adhere to a high degree of water tightness, should take a certain structural measures to prevent the wear and tear of the film.
6、对金属联接件应选用牢靠的防腐蚀办法。 7、在支承构件与膜材的联接处不得有毛刺、尖角、尖点。
6, the metal connection pieces should choose a reliable anti-corrosion measures. 7, the connection point of the support member and the membrane material remove burrs and sharp edges, sharp point.
膜构造的支承构造和各项联接构造应契合以下规范：
The supporting structure of the membrane structure and the connection structure should meet the following specifications:
1、确保联接的安全、合理、美丽。
1, to ensure that the connection is safe, reasonable and beautiful.
2、联接件应具有足够的强度、刚度和耐久性，应不先于所联接的膜材、拉索或钢构件损坏，并不发作影响构造受力功用的变形。联接处的膜材应不先于其它部位的膜材损坏。
The 2 connecting parts should have sufficient strength, stiffness and durability, should not precede the membrane material and the connecting cable or steel parts damaged, does not attack force function of the influence of tectonic deformation. The membrane material of the joint should not be damaged before the other parts of the membrane.
3、联接件应传力牢靠，并削减联接处应力会集。
3, joint force should be firm, and cut joint stress convergence.
4、节点构造应契合计算假定。应思考节点构造偏心对拉索、膜材发作的影响，施加预张力的办法、构造装置答应误差，以及进行二次张拉的也许性。
4, node structure should be fit to calculate the assumption. The influence of the structure of the joints on the attack of the cable and the membrane material, the method of pre tension, the error of the construction device, and the possibility of the two tensile stress should be considered.
5、在膜材联接处应坚持高度水密性，应采取必定的构造办法防止膜材磨损和撕裂。
5, at the junction of the membrane material should adhere to a high degree of water tightness, should take a certain structural measures to prevent the wear and tear of the film.
6、对金属联接件应选用牢靠的防腐蚀办法。
6, the metal connection pieces should choose a reliable anti-corrosion measures.
7、在支承构件与膜材的联接处不得有毛刺、尖角、尖点。
7, the connection point of the support member and the membrane material remove burrs and sharp edges, sharp point.
软膜天花防火等级是多少？软膜天花是由三个有些所构成的软膜，扣边条，龙骨。其间软膜天花选用格外的资料制成，确保不含污染环境元素(镉)，其防火等级为B1（我国），经过一次或屡次切开成形，并用高频焊接完结，软膜天花是要依照在实地丈量出的天花形状及尺度在工厂里出产制造而成。软膜天花扣边条：是半硬质，揉捏成形的，选用资料，其防火等级为B1（我国），A级防火膜天花被焊接在天花软膜的附近边际，以张紧软膜扣在墙码条上,能够到达完美缝合的作用。
How much is the piamater ceiling fire rating? Soft film smallpox is composed of three strips of some soft, buckle, keel. During the selection of extra soft film ceiling materials, to ensure that does not contain elements of environmental pollution (CD), the fire rating of B1 (China), after one or more open forming, and by high frequency welding end, soft film smallpox is to make production in the factory in accordance with the shape and scale of smallpox in the field of measurement and. Soft film smallpox buckle edge: is semi hard, kneading, forming material selection, the fire rating of B1 (China), a fireproof film is welded to the smallpox smallpox soft film near the margin, with tensioning buckle in soft wall bar code, can reach the perfect stitching effect.
配件：选用铝合金制成，其防火等级为A1（我国）。拉膜天花有各式各样适宜的不相同形状，直的、弯的，有的是可被切开成适宜的视点后再装置在一同，并被固定在室内天花的附近上，以用来扣住天花软膜。
Accessories: the use of aluminum alloy, the fire rating of A1 (China). Film pulling with smallpox for every kind of different shapes, straight, curved, some can be cut into the appropriate view after the device together, and are fixed in the vicinity of the indoor ceiling, to fasten the smallpox soft film.